Comtrol ES9528-XT User Guide - Manual (Page 127)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Using the Serial Console - 127
Configuration Using the Command Line Interface (CLI)
5. Type a Host Name to represent the COM port.
6. Click Serial on the left side under Category.
7. Configure the serial line with the following
characteristics.
8. Click Session under Category in the menu.
9. Type an appropriate Saved Session name and click
Save.
10. Click Open.
Serial Settings Value
Baud Rate 9600
Data bits 8
Parity None
Stop Bit 1
Flow Control None