Comtrol ES9528-XT User Guide - Manual (Page 165)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Traffic Prioritization (CLI) - 165
Configuration Using the Command Line Interface (CLI)
QoS Setting (Continued)
QoS Priority Mode
Switch(config)# qos priority
cos CoS
dscp DSCP/TOS
port-based Port-based
Switch(config)# qos priority dscp
Switch# show qos priority
QoS Priority Mode: DSCP
Display - Queue
Scheduling
Switch# show qos queue-sched
QoS queue scheduling scheme : Weighted Round Robin
COS queue 0 = 1
COS queue 1 = 2
COS queue 2 = 3
COS queue 3 = 4
Display – Port Priority
Setting (Port Default
Priority)
Switch# show qos port-priority
Port Default Priority :
Port Priority Queue
-----+----
1 7
2 0
3 0
4 0
5 0
………..
25 0
26 0
27 0
28 0
CoS-Queue Mapping
Format
Switch(config)# qos cos-map
PRIORITY Assign an priority (3 highest)
Switch(config)# qos cos-map 1
QUEUE Assign an queue (0-3)
Note: Format: qos cos-map priority_value queue_value.
Map CoS 0 to Queue 1
Switch(config)# qos cos-map 0 1
The CoS to queue mapping is set ok.
Map CoS 1 to Queue 0
Switch(config)# qos cos-map 1 0
The CoS to queue mapping is set ok.
Map CoS 2 to Queue 0
Switch(config)# qos cos-map 2 0
The CoS to queue mapping is set ok.
Map CoS 3 to Queue 1
Switch(config)# qos cos-map 3 1
The CoS to queue mapping is set ok.
Map CoS 4 to Queue 2
Switch(config)# qos cos-map 4 2
The CoS to queue mapping is set ok.