Comtrol ES9528-XT User Guide - Manual (Page 198)

198 - Port Interface Configuration Mode RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Complete CLI List
Port Interface Configuration Mode
For information about accessing Port Interface Configuration mode, see Port Interface Configuration Mode on
Page 198.
Switch(config)# interface fa1
Switch(config-if)# list
acceptable frame type (all|vlantaggedonly)
auto-negotiation
description .LINE
dot1x admin-control-direction (both|in)
dot1x default
dot1x guest-vlan <1-4094>
dot1x host-mode (single-host|multi-host)
dot1x max-req <1-10>
dot1x port-control (auto|force-authorized|force-unauthorized)
dot1x reauthentication
dot1x timeout (reauth-period|quiet-period|tx-period|supp-timeout|server-timeout)
TIMEVALUE
duplex (half|full)
end
ethertype [0x0800-0xFFFF]
exit
flowcontrol (off|on)
garp join-timer <10-10000>
garp leave-timer <30-30000>
garp leaveall-timer <150-150000>
ingress filtering (enable|disable)
ip access-group (<1-199> |<1300-2699>|WORD) in
lacp port-priority <1-65535>
lacp timeout (long|short)
list
loopback
mac access-group NAME in
mdix auto
no description
no dot1x admin-control-direction
no dot1x guest-vlan
no dot1x host-mode
no dot1x max-req
no dot1x port-control
no dot1x reauthentication
no dot1x timeout (reauth-period|quiet-period|tx-period|supp-timeout|server-
timeout)
no duplex
no garp join-timer
no garp leave-timer
no garp leaveall-timer
no ip access-group
no lacp port-priority
no lacp timeout
no loopback
no mac access-group
no mdix auto