Comtrol ES9528-XT User Guide - Manual (Page 87)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G VLAN Configuration - 87
Configuration Using the Web Interface
This figure displays how to configure the Egress rule of the ports.
Use the following steps to configure Egress rules:
1. Select the VLAN ID. The entry of the selected VLAN turns to light blue.
2. Assign Egress rule of the ports to U or T.
3. Press Apply to apply the setting.
If you want to remove one VLAN, select the VLAN entry and then click the Remove button.