Aggregation status – Comtrol ES9528-XT User Guide User Manual

Page 69

Advertising
background image

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G

Aggregation Status - 69

Configuration Using the Web Interface

Aggregation Status

The Port Trunk - Aggregation Information page shows the status of port aggregation. Once the aggregation
ports are negotiated, you see the following status.

Aggregation Status Page

Group ID

Displays Trunk 1 to Trunk 8 set up.

Type

The Type is Static or LACP. Static means that LACP is disabled and
configured statically by the Administrator.

Aggregated Ports

When LACP links, you can see the member ports in the Aggregated
column.

Individual Ports

When LACP is enabled, member ports of LACP group that are not
connected to the correct LACP member ports are displayed in the
Individual column.

Link Down Ports

When LACP is enabled, member ports of LACP group that are not
linked up are displayed in the Link Down column.

Reload

Click Reload to reload aggregation settings.

Advertising
This manual is related to the following products: