Comtrol ES9528-XT User Guide - Manual (Page 141)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Basic Settings (CLI) - 141
Configuration Using the Command Line Interface (CLI)
Time Setting (Continued)
Display
Switch # sh ntp associations
Network time protocol
Status: Disabled
Primary peer: N/A
Secondary peer: N/A
Switch # show clock
Sun Jan 1 04:14:19 2006 (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
Switch # show clock timezone
clock timezone (26) (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London
Switch# show ptpd
PTPd is enabled
Mode: Slave
Jumbo Frame
Jumbo Frame
Switch(config)# system mtu jumbo
<1500-9216>
Switch(config)# system mtu jumbo 9000
DHCP Server
DHCP Server configuration
Enable DHCP Server on ES9528 Switch
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp
Configure DHCP network address pool
Switch(config-dhcp)#network 50.50.50.0/4 -(network/mask)
Switch(config-dhcp)#default-router 50.50.50.1
Lease time configure Switch(config-dhcp)#lease 300 (300 sec)
DHCP Relay Agent
Enable DHCP Relay Agent
Switch#
Switch# configure terminal
Switch(config)# router dhcp
Switch(config-dhcp)# service dhcp