Futaba 4PL 2.4GHz FHSS - Manual (Page 102)

Optional Parts
102
Refer
e
nce
The following parts are available as 4PL options. Purchase them to match your applica-
tion. For other optional parts, refer to our catalog.
Transmitter Battery
When purchasing a transmitter battery use the following:
Part name
HT5F1700B (6V/1700mAh) Ni-MH battery
FT2F2100B (6.4V/2100mAh) Li-Fe battery
Please do not use the transmitter batteries HT5F1700B and FT2F2100B as the receiver's
battery.
Since the transmitter's battery has an overload protection circuit, the output power will be
shut down when the high current load is applied. This may result in runaway or fatal crash.
When requesting repair
Before requesting repair, read this instruction again and recheck your system. Should
the problems continue, request as follows.
(Information needed for repair)
Describe the problem in as much detail as possible and send the letter along with the
system in question.
- Symptom (Including the conditions and when the problem occurred)
- R/C System (Send transmitter, receiver and servos)
- Model (Type of model, brand name and model number or kit name)
- Detailed packing list (Make a list of all items sent in for repair)
- Your name, address and telephone number.
(Warranty)
Read the Warranty card.
- When requesting warranty service, send the card or some type of dated proof pur-
chase.