Futaba 4PL 2.4GHz FHSS - Manual (Page 42)

Select "TYPE" or "RESP" by
(UP) or (DN) button.
Select RX type or ser vo re-
sponse with the (+) or (-) but-
ton.
TYPE
FH, SFH
RESP
HIGH (BLS DIGI)
NORM
TYPE :Receiver type
RESP :Servo re response
42
Fu
n
c
tio
n
Model / Receiver Type / Servo Response Mode "MODEL RX"
Receiver Mode "RX MODE"
The T4PL transmitter has an FHSS 2.4GHz system transmit mode and an in-
creased response S-FHSS 2.4GHz system transmit mode. The R2104GF supplied
with the T4PL set can be used by both the S-FHSS (SFH) and FHSS(FH) type
by automatic recognition. However, when the FHSS 2.4GHZ system R603GF/
R2004GF is used, operation is impossible if it is not the FHSS(FH) type.
When the setting is incorrect, change it by "TYPE". Which RX type is set can be
checked with the HOME screen.
When the RX type is S-FHSS(SFH), the servo response can be selected from high
speed (HIGH) and normal (NORM) mode. The high speed mode is exclusively
for our digital servos (including BLS system brushless servo). When using other
servos, select the normal mode. All servos, including digital servos, can be used in
the normal mode. When the RX type is FHSS(FH), the high speed (HIGH) mode
cannot be used.
Servos used
Selecting the receiver type and servo response
- Display the MODEL RX menu by referring to P38.
(Preparation)
- Select TYPE or RESP on the RX MODE
menu screen by (UP) or (DN) button.
When the RX MODE setting was changed, and a model with an RX MODE set-
ting different from the current model was selected, turn the transmitter power off
and on. At that time the transmitter transmits in the set RX MODE.
1
Select RX type or servo response with the
(+) or (-) button.