Futaba 4PL 2.4GHz FHSS - Manual (Page 29)

When FHSS When S-FHSS
"FH" "SFH"
29
In
itial S
e
t-
Up
Before setting the Transmitter functions, check and set items 1 to 4 below.
Initial Set-Up
Preparations (Transmitter)
(Display when power switch turned on)
When the power switch is turned on, the currently selected model number is displayed.
Check if this number is the model number you want to set-up. To change the model
number, use the Model Select function (See page 39).
(Start screen)
Turn on the transmitter power.
The model number is
displayed.
The battery voltage is
displayed.
1.Rx Type Check
The T4PL transmitter can use both FHSS 2.4GHz system and increased response S-
FHSS 2.4GHz system receivers. The R2104GF receiver supplied with the T4PL set can
be used in both the FHSS type and S-FHSS type modes by automatic recognition. As
the FHSS type mode cannot be used when the FHSS 2.4GHz system R603GF/R2004GF
receiver is used, check the setting. If the setting is incorrect, change it using RX
MODE (P42). Which RX type is set can be checked with the HOME screen.