Futaba 4PL 2.4GHz FHSS - Manual (Page 93)

(DRY4 ) (N5/L2)
Voltage display
When BATT is set to dr y cell
use DRY4 or N5/L2, the volt-
age display of the HOME screen
changes.
(Katakana) (Alphabetic)
93
Fu
n
c
tio
n
System Functions "SYSTEM"
System Functions "SYSTEM"
The graphic liquid crystal screen display mode, buzzer sound and menu character mode,
etc can be set.
- Liquid crystal screen contrast adjustment (20 steps)
- Liquid crystal screen backlighting display mode setup
(OFF, ON at button operation, normally ON)
- Setting of ON time (1~30 secs) when [ON at button operation] was selected above.
- Battery type setting (DRY4, N5/L2)
The T4PL can use an optional rechargeable battery. However, the battery alarm set-
ting is different from that of the dry cell battery (alkaline battery recommended).
Therefore, always set the battery type to match the power source used. Always set the
battery type to "N5/L2" especially when using a Futaba rechargeable type battery. If
the set is used at "DRY4" setting, the time from low battery alarm to system stopping
will become extremely short.
- Buzzer sound tone adjustment (OFF, 100 steps)
- The power off forgotten alarm setting (OFF, 10 m)
- Item which displays the basic menu screen in katakana characters for Japanese use.
- *Adjuster (Steering and throttle correction can be applied. )