Futaba 4PL 2.4GHz FHSS - Manual (Page 33)

STEERING selected by press-
ing the (UP) or (DN) button on
the menu screen.
When cursor indicates a data setting item.
Pressed simultaneously.
Pressed simultaneously.
When an item with * is
selected.
Data setting items with
* are moved to another
item by pressing the
(UP) or (DN) button.
THROTTLE selected by press-
ing the (UP) or (DN) button on
the STEERING 1 screen.
CT CT
(STEERING 1 screen) (THROTTLE screen)
Example: The servo
d i r e c t i o n i s s e t by
selecting REV (servo
reverse) by pressing
the (UP) or (DN) but-
ton on the steering
screen and selecting
"NOR" or REV" by
pressing the (+) or (-)
button. Example: The coun-
terclockwise travel of
the steering servo is
set by pressing the
( U P ) o r ( D N ) b u t -
ton on the steering
screen and adjusting
EPA-L (end point) by
pressing the (+) or (-)
button.
CT
CT
UP
DN
Setting screen
MENU screen
HOME screen
33
Fu
n
c
ti
o
n
M
a
p
When the (CT) button is pressed at all the screens, an item preceded by an * is displayed to
its setup screen. For example, when *STEERING is selected at the MENU screen and the
(CT) button is pressed, that item is displayed to the steering related setup screen and REV
(servo reverse), SUBTR (sub trim), EPA (end point adjuster), and other functions can be set.
Value of each function and changing the set value
Values, settings, and other data on all the function setting screens are changed with the (+)
and (-) buttons.
Returning to the menu screen and HOME screen
Return from a setting screen to the menu screen and HOME screen as follows: