Futaba 4PL 2.4GHz FHSS - Manual (Page 62)

CT CT CT
(HOME screen) (MENU screen) (DIAL SW screen) (Function Switch screen)
Select MENU
Function selection
Direction of operation setting
62
Fu
n
c
tio
n
Function Select Switch "SWITCH"
Selection of the function to be performed by push switch (SW1.PSH, PS2.SLD) and
operation system setting can be performed by this function.
- The functions that can be assigned to each switch are listed on the next page.
- SW1.PSH alternate operation (operation which switches between ON and OFF
each time the switch is pressed) is possible.
NOR (Normal) -ON only while pressed, OFF when released.
ALT (Alternate) -Switched between ON and OFF each time pressed.
Display the function select switch screen by as follows:
1
(Setting SW selection)
Select the SW you want to set by (UP) or (DN) button.
2
(Function setting)
Select the function with the (+) or (-) button.
-Refer to the list for the abbreviations of the functions.
(Changing the SW1.PSH operation system)
Select DIR of <SW1.PSH) by (UP) or (DN)
button.
Select ALT or NOR with the (+) or (-) button.
3
When ending setting return to the DIAL SW screen by
pressing the (CT) button. To return to the menu screen, se-
lect <MENU> by (UP) or (DN) button and press the (CT) but-
ton and to return to the HOME screen select <HOME> by (UP)
or (DN) button and press the (CT) button.
Function select switch setting
Function Select Switch "SWITCH"
Adjust button
Adjust with the (+) and (-) but-
tons.