Futaba 4PL 2.4GHz FHSS - Manual (Page 66)

These setup items are different de-
pending on the master channel.
Upper side : LEFT/FWRD/UP
Lower side : RGHT/BRAK/DOWN
Program mixing function
66
Fu
n
c
tio
n
Programmable Mix "PROG MIX"
Setup item selection
- Select by (UP) or (DN) button.
This function allows you to apply mixing between the steering, throttle, channel 3 and
channel 4.
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
Relating function
steering :EPA, STR EXP, D/R, SPEED, 4WS MIX
throttle :EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, ACCFW/BK
CH3 :EPA,BRAKE MIX,4WS MIX
CH4 :EPA,BRAKE MIX,ESC MIX
Additional Functions
The movement of the master channel side will be added to the movement of the slave
channel side.
Movement of the slave channel side
Programmable Mix "PROG MIX" (All channels)
Setup items
MODE : Function ON/OFF
LEFT :
Mixing rate (Left side)
RGHT : Mixing rate (Right side)
MST : Master channel
SLV : Slave channel
MXMD : Mix mode
TRIM :
Trim mode
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Display the peogrammable mixes screen as described on P64.
Function ON/OFF (MODE)
INH,ON(OFF)
Function SW
PROGMIX
Program mixing adjustment
(Preparation)
- When "PROG MIX" is turned ON and OFF by switch, set
the switch by function select switch function (P62).
1
(Mixing function ON/OFF)
Select the setting item "MODE" by (UP) or (DN) button.
Press the (+) or (-) and set the function to the "ON" or "OFF"
state.
“INH” : Function OFF
“ON” : Function ON. When the switch is OFF, “OFF” is displayed.