Futaba 4PL 2.4GHz FHSS - Manual (Page 44)

Select MENU
(HOME screen) (MENU screen)
DN UP
Move the cursor to
*STEERING by (UP)
or (DN) button and
press the (CT) button.
Move the cursor to
*THROTTLE by (UP)
or (DN) button and
press the (CT) button.
Channel menu screens
(STEERING 1 menu screen) (THROTTLE 1 menu screen) (CH3/CH4 menu screen)
CT
On the menu screen, press the (UP) or (DN)
button and select the STEERING, THROT-
TLE, CH3 and CH4 channel.
44
Fu
n
c
tio
n
Servo Reverse "REV"
However, when the position set by trim or subtrim shifts from
the center, the center becomes the opposite side.
Servo Reverse "REV" (All channel)
This function reverses the direction of operation of the servos related to transmitter
steering, throttle, and channel 3 /4 operation.
(Preparation)
Move the cursor to REV by (UP) or (DN) button
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo operation direc-
tion.
(Each channel can be set similarly.)
2
When ending, return to the menu screen by pressing the (CT)
button.
Servo Reverse Function Setting
Select button
- Select with the (+) or (-) but-
tons.
Reverse Function selection
- Move the cursor to REV by (UP)
or (DN) buttons.
CT
Channel menu display
Display to each channel menu by the following method: