Futaba 18MZ 2.4GHz - Manual (Page 104)

104 <Model Menu (Common Functions)>
● Return to Condition
Select screen
● Touch the [Delay] button on the Condition
Select screen to call the Condition Delay
screen shown below.
(Currently selected condition name)
Condition delay setting
1. Switch to the condition you want to set.
2. Touch the Delay button of the channel you want to set.
3. Use the adjustment buttons to set the delay.
●Initial value: 0
●Adjustment range: 0~27 (maximum delay)
●Group/single mode switching (Gr./Sngl)
(For a description of the operation method, see the
description at the back of this manual.)
Condition switch setting and ON/OFF direction switching
*For a description of the selection method, see [Switch Setting Method] at
the back of this manual.