Futaba 18MZ 2.4GHz - Manual (Page 99)

99 <Linkage Menu>
●Return to Linkage Menu
●If this is turned On, the alarm will be a vibration in the
transmitter when you power on the radio.
●If this is changed to OFF, alarm will not sound
during powering up of your transmitter.
●If a throttle stick is above low throttle when you power on your
transmitter, the next screen will appear and an alarm will sound.
You should never power up your transmitter with the throttle stick above
fully closed for safety's sake.
●If you lower your throttle stick when you see this warning, the
confirmation screen will appear and ask if you would like to Transmit.
If you wish to transmit, press YES.
● Touch the [Warning] button in the Linkage Menu (2/2)
to call the setup screen shown below.
Warning Setting of warning sound and vibration
* If a throttle stick turns on a power power supply
at full throttle as in the case of the electric
craft, it may begin to turn to the prop at high
rotation suddenly, and this is very dangerous. We
recommend you set the throttle position warning
to ON.
A warning upon powering up your transmitter
can be set up for the following functions.
Default setting is ON. Leave ON any function
in which it seems that you feel is dangerous upon
power up.
The alarm is stopped at power up if the function
is changed to OFF.