Futaba 18MZ 2.4GHz - Manual (Page 31)

31 <Before Use>
S.BUS Wiring example
Battery
Battery
GY520
Extension
cord
Switch
Terminal box
HUB
HUB HUB
HUB HUB
HUB
HUB
（Another power supply）
HUB
（Another power supply）
S.BUS Servo
S.BUS Servo
Since the channel number is memorized by
the S.BUS itself, any connector can be used.
When the SBD-1 (sold separately) is used,
ordinary servos can be used with the
S.BUS system.
When a large number of servos are used or
when high current servos are used, the servos
can be driven by a separate power supply by
using a separate Power Supply 3-way Hub.
Terminal box
Four connectors can be inserted
Three connectors can be
inserted.
Used when using a separate
power supply battery.
S.BUS
Port
(8/SB)
Warning
Power supply
Please make sure that you use a battery
that can deliver enough capacity for
the number and kind of servos used.
Alkaline batteries cannot be used.