Futaba 18MZ 2.4GHz - Manual (Page 95)

95 <Linkage Menu>
Temperature Display
RPM Display
● If the temperature reaches higher than
the temperature set up here, the alarm
will operate.
● If RPM goes higher than the RPM set
here, the alarm will operate.
● Temperature Display
● RPM Display
● Display of the maximum
a n d m i n i m u m r a n g e s f o r
temperature.
[Clear] To reset.
● It is display change
from Centigrade[ ℃ ]
to Fahrenheit[ ℉ ]
● Display of the maximum and
minimum ranges for RPM.
[Clear] To reset.
● S e l e c t t h e
t y p e : E i t h e r
optical sensor
o r m a g n e t i c
s e n s o r . I n a n
optical sensor,
the number of
fins is entered.
In an magnet
sensor, the gear
ratio is entered.
● Press to setup an alarm type alert.
● Press to setup an alarm type alert.
● Press to setup vibration alerts.
4 types of vibration selections are possible.
● Press to setup vibration alerts.
4 types of vibration selections are possible.
●Return to Telemetry
●Return to Telemetry
● It is selection of the
sensor displayed on
home 2 screen.
● It is selection of the
sensor displayed on
home 2 screen.