Futaba 18MZ 2.4GHz - Manual (Page 87)

87 <Linkage Menu>
●Return to Linkage Menu
● Touch the [Idle Down] button in the Linkage Menu
to call the setup screen shown below.
Idle Down Lowers the engine idling speed.(airplane and helicopter only)
(The display screen is an example. The screen depends on the model type.)
The Idle Down function lowers the engines idle
by flipping a switch with the throttle stick at idle.
The action is not functional at high throttle to avoid
accidental dead sticks. The switch’s location and
direction must be chosen, as it defaults to NULL.
Idle down setting procedure
1. Touch the "INH" button to activate the Idle
Down function.
2. Idle Down function switch setting:
Touch the "NULL" button to call the <Switch>
screen, and then select the switch and its ON
direction.
(For a detailed description of the selection
method, see [Switch Setting Method] at the
back of this manual.)
3. Offset rate setting:
Touch the Offset Rate button. Adjustment
buttons appear on the screen.
Use these buttons to adjust the offset rate.
●Initial value: 0%
●Adjustment range: -100%~100%
*(-)becomes an idle up.
To exit the setting, touch the [Idle Down]
button.