Accelerration – Futaba 18MZ 2.4GHz User Manual
Page 137
137
<Model Menu (Airplane/Glider Functions)>
Accelerration
[Corresponding model type]: EP glider,glider
Acceleration setting can be performed at elevator,
ELE to Camber and AIL to RUD.(Glider and EP
glider only)
● This setting is divided into elevator setting and
camber setting. The setting method is the same.
● Camber setting sets the acceleration function for
ELE to Camber mixing. Setting is not performed
when ELE to Camber mixing is INH.
●The acceleration function can be set for both the Up
side and Down side.
● Function ON/OFF switch setting is performed for AIL
to RUD setting only.
● AIL to RUD setting is acceleration
function setting for AIL to RUD mixing. It is not
performed when AIL to RUD mixing is INH.
● Return to Model Menu
● Return to Model Menu
● Elevator Acceleration
● ELE to Camber Acceleration
● AIL to RUD Acceleration