Futaba 18MZ 2.4GHz User Manual

Page 111

Advertising
background image

111

<Model Menu (Airplane/Glider Functions)>

AIR BRAKE

AIL 3

(Chip Aileron)

AIL 4

(Chip Aileron)

AIL1

(Main Aileron)

AIL 2

(Main Aileron)

FLP 2

(Camber Flap)

FLP 1

(Camber Flap)

V-TAIL

at AILEVATOR

FLP 3

(Brake Flap)

FLP 4

(Brake Flap)

RUDDER 2

Winglet

RUDDER 1

(ELEVATOR 2)

RUDDER

RUDDER

ELEVATOR

(RUDDER 2)

Winglet

at Flying wing

at Flying wing

at Flying wing

( )

( )

ELEVATOR

(AILERON 5)

ELEVATOR 2

(AILERON 6)

●Camber Mix

This mixing adjusts the camber and corrects the

elevators. [Airplane/glider, 2 ailerons or more]

●ELE to Camber

This mixing is used when you want to the mix

camber flaps with elevator operation. Lift can be

increased with raised elevators. [Airplane/glider,

2 ailerons or more]

●Camber FLP to ELE

This mixing is used to correct for attitude changes

when the camber flaps are being used. [Airplane/

glider, 2 ailerons + 1 flap or more]

●Butterfly (Crow)

This function is used when powerful brake operation

is necessary. [Glider, 2 ailerons or more]

●Trim Mix 1/2

The ailerons, elevators, and flaps trim offset rate can

be utilized by a switch or condition selection. [Glider,

2 ailerons or more]

●Airbrake

This function is used when airbrakes are necessary

when landing or when diving during flight.

(Airplane, general)

●Gyro

This is dedicated mixing when a gyro is used.

[Airplane/glider, general]

●V-tail

This function adjusts the elevators and rudder of

V-tail models. [Airplane/glider, V-tail specifications]

●Ailevator

This function adjusts the elevators and ailerons of

models with elevator specifications. [Airplane/

glider, elevator specifications]

●Winglet

This function adjusts the left and right rudders

of winglet models. [Airplane/glider, winglet

specifications]

●Motor

The operation speed when the motor of F5B and

other EP gliders is started by switch can be set. [EP

glider, general]

●RUD to ELE

This function is used to correct roll maneuvers, knife

edge, etc. of stunt planes. [Airplane, general]

●Snap roll

This function selects the snap roll switch and adjusts

the steering angle of each rudder. Servo speed can

also be adjusted. [Airplane general]

●Multi Engine

This function adjusts the throttles independently

when using a multi engine model. (Maximum 4

engines) [Airplane, general]

Advertising