Futaba 18MZ 2.4GHz - Manual (Page 93)

93 <Linkage Menu>
Please select a function.
85%
Function Name
Aileron Elevator Throttle Rudder Gear Flap Aileron2 Aileron3
Aileron4 Elevator2 Flap2 Air Brake Fuel-Mix Gyro Gyro2 Gyro3
Throttle2 Throttle3 Throttle4 Flap3 Flap4 Rudder2 Camber
Motor Auxiliary7 Auxiliary6 Auxiliary5 Auxiliary4 Auxiliary3 Auxiliary2 Auxiliary1
Please select a function.
85%
Function Name
Aileron Elevator Throttle Rudder Gear Flap Aileron2 Aileron3
Aileron4 Elevator2 Flap2 Air Brake Fuel-Mix Gyro Gyro2 Gyro3
Throttle2 Throttle3 Throttle4 Flap3 Flap4 Rudder2 Camber
Motor Auxiliary7 Auxiliary6 Auxiliary5 Auxiliary4 Auxiliary3 Auxiliary2 Auxiliary1
Close
Rename
Reset
Rename
Reset
10 Characters
Aileron
Current
Aileron
Default
AIL
Current
AIL
Default
4 Characters
●Return to Linkage Menu
● Touch the [Function Name] button in the Linkage
Menu to call the setup screen shown below.
Function Name Function Names can be changed in this menu.
The setup screen will display function names in both
10 and 4 characters.
Procedure for changing the functions name
1. Select [Function Name] from the Linkage Menu.
2. Select the function whose name you want to
change.
3. Press the [Rename] button and enter the name
in 10 characters and 4 characters each from
the displayed keyboard. After the characters are
entered, press the [Return] key.
4. When the [Reset] key is pressed, the function
name is reset its original name.