Futaba 18MZ 2.4GHz - Manual (Page 45)

45 <System Menu>
85%
User Name Model1
User Name
User ID
Secure Mode
Futaba Corporation
0000
System
User Name User name registration and PIN setting
This function registers the T18MZ user name.
A PIN can also be set to protect the set data or
user name.
● Touch the [User Name] button in the System Menu
to call the setup screen shown below.
*Set the PIN carefully. When a system PIN is set, if you
forget the PIN, none of the settings can be changed. In this
case, the system must be reset by the Futaba Service Center.
●Return to System Menu
User name registration
1. When the User Name box is touched, a
keyboard appears on the screen.
2. Enter the user name from this keyboard.
*A user name of up to 32 characters can be entered.
*The set user name is displayed on the Home screen.
(For a detailed description of the input method, see [User
Name Registration/Character Input Method] in the Basic
Operation section.)
User name or set data protection
1. Touch the Security Mode button and select
the mode. The mode is switched each time
the button is touched.
*User Name: Select when you want to protect the user name
only.
*System: Select when you want to protect all the set data.
2. When the user ID button is touched, a PIN
input screen appears. Input a PIN of up to 4
digits.
3. When the "Return" key is touched , the
display returns to the preceding screen.
4. When the transmitter power is turned off, the
set security mode becomes active.
*When a PIN is set for the user name, it must be entered the
each time the User Name screen is opened.
When a System PIN is set, a button displaying a key icon
appears on the Home screen.
When you want to change any settings, touch this button and
enter the PIN.
If you want to nullify your current password,
set the password to "0000" (default value).