Futaba 18MZ 2.4GHz - Manual (Page 74)

74 <Linkage Menu>
●Return to Linkage Menu
● Touch the [Picture] button in the Linkage Menu to call
the setup screen shown below.
Picture A picture on the home screen can be set for each model. (Simplifies identification of the
model data during screen operation.)
A photograph of the model taken with a T18MZ
camera, digital camera or other file can be pasted
as the screen display data for each model. This is
convenient in identifying models with the same
model name.
*The picture files which can be displayed on the screen are
size 168 x 80 pixels, file type .bmp (bit map picture)and
JPEG files. If a file larger than 168x80 is used, the picture
displayed will be reduced.
When a picture is pasted, it is displayed as a
screen image in the following screens:
●Model Select screen
●Home screen
●Startup screen
Pasting a picture
*Picture data is set to the model memory currently in use.
*You can choose to use a picture that is saved in these places:
T18MZ, SD card, USB memory.
1. Select the picture from the File List by
touching the desired picture data.
*Before selection, touch the scroll button at the top or bottom
of the Thumbnail and confirm the contents of the picture to
be saved by the preview screen.
2. To paste the picture, touch [Yes]. (When you
want to cancel pasting, touch [No].)
Copy/Delete/Release/Rename of picture
1. Select the picture from the [Thumbnail] by
touching the desired picture data.
2. To paste the picture, touch this screen is
displayed.
3. Copy (T18MZ/SD card/USB memory), Delete,
Release, Rename or selection.
*Release : It loses from Current File.
Delete : Picture data is deleted.
*If the data which is not pasted is chosen from a thumbnail,
the [Entry] button will appear, and if it is pushed, it can
pasted and do.
4. Next, it chooses in [Yes] and [No]. In Rename,
name is inputted into the keyboard which
appeared, and, finally it pushes Enter.
[Important]
Before reading data from the PC, insert the
SD card/USB memory into the transmitter and
turn on the power. The following folders are
automatically written. To read a file from the PC,
copy the file to a folder by file type.
●BMP: Picture file ●WAV: Audio file
●WMA: Music file ●MODEL: Model data
● The name of the pasted picture is displayed.