Futaba 18MZ 2.4GHz - Manual (Page 94)

94 <Linkage Menu>
Telemetry Displaying data from the receiver
This screen displays your choice of data from the
receiver.
Also warnings can be activated regarding the
data. For example, if the receiver voltage drops, the
user can be warned by an alarm.
● Call the following setting screen by pressing the
[Telemetry] button of the Linkage Menu.
● If voltage falls further than the voltage
set up here, the alarm will operate.
● It is selection of the
sensor displayed on
home 2 screen.
● External Input voltage
( Extra Voltage connector)
● Display of the maximum and
minimum ranges for voltage.
[Clear] To reset.
● Press to setup an alarm type alert.
● Press to setup vibration alerts.
4 types of vibration selections are possible.
●Return to Linkage Menu
●Receiving state (R7008SB → T18MZ)
●Return to Telemetry
Warning
Do not watch the transmitter
screen during flight.
*You may loose sight of the aircraft during
flight and this is extremely dangerous.
Have an assistant on hand to check the
screen for you. A pilot should NEVER
take his eyes off his aircraft.
Receiver Battery Display
5.9V
5.0V - 6.4V
0.0V - 0.0V
0.0V