Conair WSB User Manual
Page 89
CLEAN OUT ISSUES
We always try to design with clean out in mind. For this reason all
models have removable weigh bins, mix blades, and mix chambers.
Selected models have additional clean out issues.
GBM Micro Blenders and all blenders with removable hoppers use our
verticalor pivot style valves. Most pivot valves are fitted with a
sleeve over the air cylinder that shields the dispense valve when it is
retracted. Dust can accumulate under this sleeve, between the sleeve and
the air cylinder. To clean, remove the air fitting on the cylinder.
This fitting is all that retains the sleeve on the cylinder. With the
fitting removed, one inch sleeves will drop out the bottom of the
hopper, free of the cylinder. Larger sleeves require the cylinder be
removed from the mounting bolt, and the sleeve lifted upward off the
cylinder.
Page 90