Keri Systems TAP100 - Manual (Page 18)

TAP 100 Application Software Manual
Page 18 Revision 3.3
by assigning it to a working time zone. This is an easy and convenient way to disable a card for
someone who is on vacation or has taken a leave-of-absence. The card cannot be used while it is
assigned to this time zone. But, the card remains in the database, and can be quickly enabled
when the person returns.
NOTE: By factory default, time zone 7 has been configured as a ‘Never’ time zone.
The Initial Enrollment Time Zone for New Cards
The initial enrollment time zone for new cards automatically assigns the defined time zone to
newly enrolled cards. These cards stay at this time zone value until manually reassigned by the
software operator. This is an easy and convenient way to assign one time zone to a batch of
cards being enrolled; where one time zone value is set for typical users.
To set the default time zone values, use your pointing device, and select Timezone defaults. A
prompt box will appear, displaying the current time zone values.
The status message line will display:
Using your pointing device, select the default time zone value that you want to set, and type in the
number.
For example: To set the Initial Enrollment time zone to 5, point to the Initial Enrollment field and
type:
5 <ENTER>
Set Event Log Viewing Options
The set event log viewing options command formats the cardholder and reader data in the event
log for viewing by a system operator. Using this command, you can format event data to display
the cardholder name with or without the card’s slot number and the reader’s name with or without
the reader’s ID number.
To set the event log viewing options, use your pointing device, and select Event Log display. A
prompt box will appear, displaying the current event log viewing options.
Specify timezones to be automatically assigned.
Default Time Zones
Disabled Cards: 7
Initial Enrollment: 7
Event Log Viewing Options
( ) Show Slot Numbers and Cardholder Names
( ) Show Cardholder Names Only
( ) Show Reader Numbers and Names
( ) Show Names of Readers Only
OK QUIT