Keri Systems TAP100 - Manual (Page 25)

TAP100 Application Software Manual
Revision 3.3 Page 25
To simplify this process, a table, breaking down this conversion process is provided in Appendix
2. By working the responding nodes value through the table in Appendix 2, you can easily
determine which controllers are responding to the network
Favorite Nodes, by factory definition, is always set to 00000001.
Links in Bindery identifies the number of reader I/O links that have been defined for the system.
For information on I/O links, see the Setting Reader I/O Assignments section on page 38.
When you are finished viewing this information, use your pointing device and select OK.