Keri Systems TAP100 - Manual (Page 65)

TAP100 Application Software Manual
Revision 3.3 Page 65
Press any key to return to the TAP100 main menu. All reader/network transactions have been
retrieved and can be viewed and manipulated using the Open Transactions File command on
page 59 or archived using the Backup File command on page 64. All transaction data has been
cleared from the readers.
If you want to retrieve the readers’ transaction logs but do not want to clear these logs (allowing
the readers to continue to add transaction information to them), use your pointing device and
select NO. The status message line will display:
Once communication has been established with the local network, the status message line will
count off the readers communicated with and the number of transactions collected.
The status message line will keep a running total until all readers and transactions have been
retrieved.
When this process is complete, the following prompt box will appear.
Press any key to return to the TAP100 main menu. All reader/network transactions have been
retrieved and can be viewed and manipulated using the Open Transactions File command on
page 59 or archived using the Backup File command on page 64. All transaction data remains on
the readers and will continue to be added to as events occur on the network.
Initiating communication with local network on COM1 . . . please wait.
Have xx of xx events from reader yy; grand total of zz.
Done with all readers. Total zz transactions fetched.
GETTING TRANSACTIONS FROM NETWORK
DATE TIME CARDHOLDER READER DESCRIPTION
3/03 08:00 John Q Public 4-A EMP ENTR INP1-T/OPEN
3/03 17:00 John Q Public 4-B EMP EXIT OUT1-ACTIVE
• • •
Clearing xx transactions from reader yy.
Press any key to continue.
GETTING TRANSACTIONS FROM NETWORK
DATE TIME CARDHOLDER READER DESCRIPTION
3/03 08:00 John Q Public 4-A EMP ENTR INP1-T/OPEN
3/03 17:00 John Q Public 4-B EMP EXIT OUT1-ACTIVE
• • •
Press any key to continue.