Keri Systems TAP100 - Manual (Page 39)

TAP100 Application Software Manual
Revision 3.3 Page 39
Setting an ‘OR’ I/O Assignment
To set-up the required input to output links for an ‘OR’ connection, use your pointing device and
select Utilities and then I/O Assignments. The following prompt box will appear.
In an ‘OR’ connection, you will use one I/O assignment link for each input to be ‘OR-ed’ together
(even if these inputs reside on the same option board). All of these links will be assigned to the
same output on the same controller.
NOTE: You can keep ‘OR-ing’ inputs together until all of the available assignment slots
are used. This can be done by using one input from 32 separate controllers or by using
all 4 inputs from 8 controllers or by any combination of inputs and controllers to meet the
32 I/O assignment maximum.
Use the up and down arrows to select the links you wish to define. In this example, we will work
with I/O assignment links 0 and 1. We will use one input on each of the controllers for reader 1
and reader 2, and we will use output 1 on the controller for reader 2.
Use the up and down arrows and place the highlight bar on Link 0. Use your pointing device and
select MODIFY. The following prompt box will appear.
There are five fields you will need to work through to make the I/O assignment. If at any time
during the assignment process you wish to exit without making any changes, use your pointing
device and select QUIT. If at any time you wish to return all inputs and outputs to their factory
default values (all inputs and outputs disabled), use your pointing device and select DISABLE.
I/O ASSIGNMENTS
INPUT INPUTS OUTPUT OUTPUTS
LINK READER 1 2 3 4 PC READER 1 2
1 -----Available -----
2 -----Available -----
3 -----Available -----
• • •
0 -----Available -----
MODIFY PRINT SEND CLEAR QUIT
I/O ASSIGNMENTS FOR LINK 0
Input Reader: Sup I/O: No Polarity: Norm. Closed
Input Lines:
1
2
3
4
Output Reader:
Output Lines:
1
2
1 Reader 1
( ) Active ( ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None
( ) Active ( ) Normal ( ) Tamper ( ) None
[ ] Send to PC 1 no-name 1-A
( ) Not Used ( ) Deactivate ( ) Activate ( ) Momentary
( ) Not Used ( ) Deactivate ( ) Activate ( ) Momentary
OK QUIT DISABLE