Keri Systems TAP100 - Manual (Page 66)

TAP 100 Application Software Manual
Page 66 Revision 3.3
Advanced Commands
Advanced commands are used to perform specific immediate tasks on the network. These tasks
include real-time monitoring of network events, installing a new reader to an existing network,
immediate reader locking and unlocking, global locking and unlocking of all readers, and card
security functions.
Monitor Network Events
The monitor network events command allows you to monitor the network communication line and
review in real-time events that are occurring at the readers and alarm relays. To monitor network
events, use your pointing device and select Transactions, and then Monitor Events. The Status
Message Line will display:
Once communication is established with the network, the Status Message Line will display:
And the following prompt box will appear.
As events such as access, egress, or alarm conditions occur on the network, a status line
announcing the event will appear on the screen. When you no longer need to monitor network
events, use your pointing device and select OK. The prompt box will note on the screen:
And the Status Message Line will display:
The software clock will count down from 20 seconds and then return to the TAP100 main menu.
The system will continue to post events until the clock ends its count.
Initiating communication with local network on COM1 . . . please wait.
Monitoring events.
MONITOR MODE WILL END IN 20 SECONDS.
MONITORING EVENTS ON NETWORK
DATE TIME CARDHOLDER READER DESCRIPTION
MONITORING EVENTS ON NETWORK
DATE TIME CARDHOLDER READER DESCRIPTION
******** REQUEST TO END MONITOR MODE ********
QUIT
QUIT