Keri Systems TAP100 - Manual (Page 61)

TAP100 Application Software Manual
Revision 3.3 Page 61
The default is a large date range. Use your pointing device and select the date range you wish to
limit viewing to. Press
<ENTER> if the date range entered is correct. Otherwise , press <ESC> to
not set a date range.
If you select Time, the following prompt box appears.
The default is the full 24-hour clock. Use your pointing device and select the time range you wish
to limit viewing to. Press
<ENTER>
if the time range entered is correct. Otherwise , press
<ESC>
to not set a time range.
If you select Type, the following prompt box appears.
The default is to display cards. Use your pointing device and select cards only to view all card
related transactions, alarms only to view all alarm related transactions, and intercom only to view
all communication related transactions. Press
<ENTER>
once you have selected a transaction
type. Otherwise , press <ESC> to not set a transaction type.
If you do not wish to select specific sort criteria, use your pointing device and select QUIT.
Otherwise, use your pointing device and select OK. The original transactions log prompt box will
appear with all transaction data sorted according to the criteria you have set.
If you wish to have hard copy of this data, you can print it out. Use your pointing device and select
PRINT. The following prompt box will appear.
TRANSACTIONS LOG: c:\proxnet\log.dbf
TOTAL: XX events LIMIT: None SORT: Time & Date YEAR: 1996
DATE TIME SLOT CARDHOLDER READER DESCRIPTION
3/03 08:00 04 John Q Public 4-A EMP ENTR INP1-T/OPEN
3/03 17:00 04 John Q Public 4-B EMP EXIT OUT1-ACTIVE
• • •
SEARCH PRINT EXAMINE OPTIONS QUIT
Time Range
Start:
End:
Press ENTER key if data is OK.
Press ESC key to quit.
Select Type
Press ENTER key if data is OK.
Press ESC key to quit.
00:00
23:59
( ) 1 - Cards only
( ) 2 - Alarms only
( ) 3 - Intercom only