Keri Systems TAP100 - Manual (Page 60)

TAP 100 Application Software Manual
Page 60 Revision 3.3
If you select Slot, the following prompt box appears.
The default is all available slots. Use your pointing device and select the range of slots you wish
to limit viewing to. Press
<ENTER> if the slot range entered is correct. Otherwise , press <ESC>
to not set a slot range.
If you select Name, the following prompt box appears.
The default is the entire alphabet. Use your pointing device and select the range of letters you
wish to limit viewing to. Press
<ENTER>
if the name range entered is correct. Otherwise , press
<ESC> to not set a name range.
If you select Reader, the following prompt box appears.
The default is all available readers. Use your pointing device and select the range of readers you
wish to limit viewing to. Press
<ENTER>
if the reader range entered is correct. Otherwise , press
<ESC> to not set a reader range.
If you select Date, the following prompt box appears.
Slot Range
Start:
End:
Press ENTER key if data is OK.
Press ESC key to quit.
Name Range
Start:
End:
Press ENTER key if data is OK.
Press ESC key to quit.
Reader Range
Start:
End:
Press ENTER key if data is OK.
Press ESC key to quit.
Date Range
Start:
End:
Press ENTER key if data is OK.
Press ESC key to quit.
0
7000
A
Z
1
32
01/01/1900
12/31/9999