Toa FS-7000 SERIES Installation - Manual (Page 39)

39
(4) Priorities Among FS-7000RM Units (SW #7 and #8): Last-in-first-out / First-in-first-out / Individual
priority / None
(Default: Last-in-first-out)
Designate priorities among announcements made simultaneously from multiple connected FS-7000RM
microphones. There are 4 priority setting methods, as follows:
• Last-in-first-out (LIFO)
The announcement from the FS-7000RM last operated takes precedence.
• First-in-first-out (FIFO)
The announcement from the FS-7000RM first operated takes precedence. Until this announcement is
completed, other FS-7000RM microphones cannot make broadcasts.
• Individual Priority*
The announcement from the FS-7000RM assigned a smaller address number takes precedence. The FS-
7000RM with an address number smaller than that of the FS-7000RM currently making broadcasts can make
broadcasts to the selected zones. However, the FS-7000RM with a larger address number must wait until the
current announcement is completed.
• None
No priority relationship exists among the FS-7000RM units. Announcements from different FS-7000RMs are
mixed and broadcast to the selected zone.
FIFO None Individual priority* LIFO
* If Individual Priority is selected, the smaller the address number, the higher priorities among the connected
FS-7000RMs.
Address 0 > Address 1 > Address 2 > Address 3