Toa FS-7000 SERIES Installation - Manual (Page 76)

76
10. MOUNTING THE YA-7000 IN THE POWER AMPLIFIER
YA-7000
YA-7000
Step 2. Connect the YA-7000's harness to the
amplifier's internal connector.
Step 3 . Mount the YA-7000 in the power amplifier's rear panel using the 2 supplied M3x6 screws.
Step 4 . Set the YA-7000's Operation Mode Selector Switch to the Normal position.
Step 1. Use nippers or a similar tool to remove the amplifier's rear-mounted YA-7000 receptacle
panel by cutting away the portions marked with (6 places).
Figure shows the FS-7012PA.
Connector
Machine screws M3 x 6 Operation
Mode Selector Switch