Toa FS-7000 SERIES Installation - Manual (Page 91)

91
Insertion
direction
Tear-off line
30 29
136
13
9 x 13 = 117
9.5
7
Insertion
direction
Unit: mm
Thickness = 0.2 Writing range
(area surrounded by a broken line)
FS-7000RM
Zone identification card
Insert in this direction.
2. FS-7000RM/FS-7010RM ZONE IDENTIFICATION CARDS
Write the names of broadcast zones on the zone identification cards for the FS-7000RM and FS-7010RM.
Use this page as a template, either copying the card itself or creating a similar card with the same dimensions.
Zone Identification Cards
(1) When copying (full scale):
Write the broadcast zone names within the dotted-line rectangles.
(2) When creating new cards:
Use the following dimensions when creating zone identification cards:
Card Insertion