Toa FS-7000 SERIES Installation User Manual
Page 42
42
6.6.2. Joining the FS-7000RM to the FS-7010RM
Step 1. Turn over the FS-7000RM and FS-7010RM and bring both units next to each other.
Step 2. Using the cable supplied with the FS-7010RM, connect the FS-7000RM's Connection Terminal to the
Connection Terminal on the FS-7010RM's left side panel.
Step 3. Join the FS-7000RM to the FS-7010RM using the connecting plate (B) and the 4 screws supplied with
the FS-7010RM.
Step 4. Join the FS-7000RM to the FS-7010RM using the 2 connecting plates (A) and the 8 screws supplied
with the FS-7010RM.
Note
Follow the same procedure when joining any additional FS-7010RM to the FS-7010RM.
FS-7010RM
FS-7000RM
3
4
FS-7010RM
FS-7000RM
2
Connection cable
Connecting plates (B)
Connecting plates (A)
[Bottom surface]
[Bottom surface]
: Supplied cable
See page 64; Table for Cables.