Cino PL680BT HC - Manual (Page 13)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
5
Decide Your Radio Link Mode
The FuzzyScan Bluetooth image scanner provides several radio link modes to communicate with most host devices. When
the Bluetooth-enabled host device is not available, it can work with the smart cradle in PAIR mode (peer-to-peer connection)
or PICO mode (multiple connections) to provide a plug-and-play cordless migration of your existing non-Bluetooth-enabled
devices. Moreover, you are also able to use the scanner to work with Bluetooth-enabled host devices via SPP mode or HID
mode.
When the radio link is disconnected, the scanner is capable of reconnecting the radio link automatically when it returns to the
communication coverage. But please note that this feature is not available in SPP slave mode. If you would like to change
the radio link mode, please scan the “Uninstall” command to reset the scanner to uninstall state.
PAIR Mode
If the Bluetooth device is not available in your existing system, PAIR mode is the simplest plug-and-play solution. In this
mode, a smart cradle can only work with one scanner. The smart cradle not only provides the Bluetooth radio link with the
scanner, but also offers the legacy cabled interfaces to the host device, including USB HID, USB COM, PS/2(DOS/V)
Keyboard Wedge and RS232 Serial.
PICO Mode
For the requirement of multiple connections, up to 7 scanners can be connected to one smart cradle concurrently. If you
would like to un-pair all scanners paired with the smart cradle, please press and hold the paging/reset button of the smart
cradle for more than 5 seconds. If you just want to un-pair part of the paired scanners, please take those paired scanners to
scan the “Uninstall” command one by one.
HID Mode
Through the most useful HID service, the scanner can work as a Bluetooth Keyboard. In this mode, the scanner will be
discoverable by the radio connection request issued by the remote host device. For some cases, you may be requested to
enter the Passkey (PIN) to establish the Bluetooth connection for security purpose.
SPP Master/Slave Mode
Through the standard SPP service, the scanner can work as a Bluetooth Serial Device. In SPP master mode, the scanner
initiates the radio connection request to the remote slave device. In SPP slave mode, the scanner will be discoverable by the
radio connection request issued by the remote host device.