Cino PL680BT HC - Manual (Page 82)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
74
PROGRAM
Operation Control
(All Series)
♦ Time-out Setting, Good Read Duration ♦ F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Light Source On Time SS
SS
SS
SS Short
Medium
Long
Extremely long 0
1
2
3
Hands Free Time-out SS
SS
SS
SS
SS Short
Medium
Long
Extremely long
Disable 0
1
2
3
4
Good Read Duration SS
SS
SS
SS
SS Short
Medium
Long
Extremely long
Extremely short 0
1
2
3
4
Time Delay to Low Power Trigger SS
SS
SS
SS
SS
SS 1 sec
3 secs
5 secs
7 secs
9 secs
Immediate 0
1
2
3
4
5
The Light Source On Time is a pre-defined light source time out counter for Alternative Mode, Presentation Mode and Level Mode. The scanner keeps the light source on
till the pre-defined light source on time is up. You can adjust this parameter to meet your own application requirement.
The Presentation Mode is referred to as “hands free” mode. The hands free mode will be automatically changed to manual trigger mode when you press the trigger. You
can remain the scanner in manual trigger mode by setting the Hands Free Time-Out. Once the time-out duration is up (if there’s no any trigger operation), the imager will
revert to the original hands free mode.
The Time Delay to Low Power Trigger sets the time for scanner to enter low power trigger mode after any scanning activity.