Cino PL680BT HC - Manual (Page 20)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
12
Out-of-range Scanning
When the radio connection is established between scanner and remote host device, the scanner will transmit each scanned
data right after scanning the barcode. However, the scanner is preset not to scan any barcode data when it loses the radio
connection with the remote host device.
If you enable the out-of-range scanning function, the scanner is able to continue scanning barcode data while it is out of
radio coverage. All scanned data will be temporarily stored into the memory buffer until radio link resumed.
Enable Out-of-range Scannning Disable Out-of-range Scanning
In case of the scanner is out of radio coverage, you will hear 4 beeps in descending tone to indicate the radio connection lost.
The link indicator of scanner will blink blue 3 times per 2 seconds. Once the scanner is back to radio coverage, you will
hear 4 beeps in ascending tone to indicate the radio connection rebuilt and the scanner will blink blue once per 2.5
seconds. At the same time, all stored scanned data will be transmitted automatically right after the radio link is resumed.
Presentation Scanning (Gun type only)
The Presentation Scanning is designed for hand-free applications for user’s convenience. If the “Presentation Scanning
Auto-sense” function is enabled, the scanner is capable of automatically switching to presentation mode as soon as you
place it onto the SmartStand or cradle.
Enable Auto-sense Disable Auto-sense