Refer ence man ual, Wir eless fuzzyscan, Operation control (all series) – Cino PL680BT HC User Manual
Page 89
W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
81
PROGRAM
Operation Control
(All Series)
♦ Sleep Time-out Control, Power Off Time-out Control ♦
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
Sleep Time-out of Connect State
SS
MS
6 (x5) minutes
0-99 (x5) minutes
If you don’t want the scanner to enter sleep mode, please set time-out to “0”
FIN
(2 digits)
Sleep Time-out of Disconnect State
SS
MS
1 minute
0-99 minutes
If you don’t want the scanner to enter sleep mode, please set time-out to “0”
FIN
(2 digits)
Power Off Time-out
SS
MS
6 (x5) minutes
0-12 minutes
If you don’t want the scanner to enter power off mode, please set time-out to “0”
FIN
(2 digits)
The Sleep Time-out Control can be set under radio connection or disconnection state. If the scanner is not used within the preset time-out duration, it will automatically
enter “Sleep Mode” for power saving purpose. You are able to disable this function by setting the time-out duration to “0”.
The Power Off Time-out Control: When the scanner is under Sleep Mode, it is preset to enter Power Off automatically if it‘s not woke up after time-out duration. If you
would like to wake up the scanner, please press the trigger button. Meanwhile, you are able to disable this function by setting the time-out duration to “0”.