Cino PL680BT HC - Manual (Page 91)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
83
PROGRAM
Operation Control
(All Series)
♦ Batch Scanning Data Transmission Setting ♦ F_DEFAULT
Family Code Selection P.C Parameter Selection Option Code
Field Delimiter SS
SS
SS
SS
SS
SS None
SPACE
–
User define
0
1
2
3
4
5, [00-7F]
Batch Data Quantity Output Format SS
SS
SS As many times as the quantity indicates
<Quantity><Field Delimiter><Scanned Data>
<Scanned Data><Field Delimiter><Quantity> 0
1
2
Data Transmission Format SS
SS
SS Disable (scanned data only)
Leading with MAC address (MAC address and scanned data)
Leading with ID No. (scanner ID and scanned data)
Only available for RS232, USB HID and USB COM interface in PAIR & PICO modes 0
1
2
The Field Delimiter is used to separate the specific information and scanned data into two fields. You can choose desired delimiter format.
The Batch Data Quantity Output Format If you want to input the quantity information of barcode data, you can enter the quantity from 1 to 9999 by scanning the quantity
barcodes right after you scanned the barcode data. The quantity information will be stored into the memory storage together with the barcode data. There are three ways to
output the stored barcode data and quantity information.
In PICO mode, up to 7 scanners can be connected with one smart cradle. The Data Transmission Format can help user to identify the source of the transmitted data.
You can choose to transmit the scanned data leading with MAC address or pre-assigned ID.
Example format: <MAC address><Field Delimiter><Data> or <ID><Field Delimiter><Data>.