Refer ence man ual, Wir eless fuzzyscan – Cino PL680BT HC User Manual
Page 35
W
ir
eless FuzzyScan
R
efer
ence Man
ual
Configure Your FuzzyScan
27
PROGRAM
Symbology Reading Control
♦ Readable Bar Code Setting ♦
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
Readable Symbology Setting
CS
CS
CS
CS
CS
CS
CS
Australian Post
British Post
Intelligent Mail barcode
Japanese Post
KIX Post
Planet Code
Postnet
B0
B1
B3
B4
B5
B6
B8
If your application is known, you may select those known symbologies only to increase the reading speed and decrease the possibility of reading error. Furthermore, to add
the “Symbology ID” into the transmitted data is also helpful to identify the specific symbology.
Above symbologies marketed with * are enabled as default. When you select “Auto”, the scanner only reads those symbologies marked with *.
When you set the minimum and maximum length of each symbology, please note the data length of scanned bar code doesn’t include start/stop characters.