Cino PL680BT HC - Manual (Page 19)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
11
Establish SPP Slave Connection
Ensure the battery is fully charged and a virtual COM port is available in your remote host for connecting the scanner. If
not, please go to the folder “Client Applications” located in Bluetooth Advanced Setting. Click the “Add COM Port” to
add one more Bluetooth COM port.
Power on or wake up the scanner by pressing the Trigger key within radio coverage if the scanner is power-off or in sleep
state, and ensure the status indicator of scanner blinks red and green alternatively (in “Uninstall” state). If the scanner
is not in uninstall state, please scan the “Uninstall” command first. Then scan the “SPP Slave Mode” command, and the
link indicator of scanner will blink blue 3 times per 2 seconds during searching process.
Uninstall SPP Slave Mode
You have to execute the Bluetooth Discovery procedure to find all available Bluetooth device list in your remote host. You
will see ‘F(L/A)xxxBT-xxxx’’ or ‘PF(L/A)xxxBT-xxxx’’ is shown in the list if the scanner is successfully discovered.
Double click the “F(L/A)xxxBT-xxxx” or ‘PF(L/A)xxxBT-xxxx’’ on the discovered Bluetooth devices. If the PIN Code or
Passkey is requested for security connection, please enter “00000000” (default setting). You will see “Serial Port on
F(L/A)xxxBT-xxxx” or ‘PF(L/A)xxxBT-xxxx’’. Please double click this SPP service to establish the connection between
scanner and remote host device.
The scanner will emit 4 beeps in ascending tone to indicate the connection is established. At the same time, the link
indicator of scanner will blink blue once per 2.5 seconds to indicate the scanner is in radio-connected state.
Please note that if the scanner is not connected to the host device within 1 minute after scanning the “SPP Slave Mode”
command, the scanner will go to sleep automatically. You can just press the trigger to wake up the scanner to continue
the installation.
The above procedures are based on popular Windows environment. But the installation procedures may vary
depending on different remote host devices, operating systems and the Bluetooth software drivers. Please consult your
professional IT consultant to obtain necessary support if any problem has been encountered during the installation
processes. For more detailed information, please visit CINO website.