Cino PL680BT HC - Manual (Page 21)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
13
Paging Function
The Paging function is helpful for you to locate the paired smart cradle or scanner. If you would like to page the paired smart
cradle, you can scan “Paging” command. If you would like to page the paired scanner, you can press the paging/reset button
of the smart cradle no longer than 3 seconds.
Paging
Sleep Mode & Power Off
The scanner is preset to enter “Sleep Mode” if the scanner is not used after the user-defined time-out duration. Meanwhile,
pocket scanner can also be entered “sleep mode” instantly by pressing Function Key 1 twice (each time lasts more than
one second)
When the scanner is under sleep mode, it is preset to enter “Power Off” automatically if it’s not woke up after time-out
duration. For pocket scanner user, you can also power off the pocket scanner by pressing and holding the Function Key 1
for more than 3 seconds.
You can have your scanner entered “Sleep Mode” or “Power Off” by scanning the following “Sleep Mode” or “Power Off”
command.
Sleep Mode Power Off
If you would like to power on or wake up the scanner, please press the trigger key.
Paging/Reset Button