Cino PL680BT HC - Manual (Page 23)

W
ir
eless FuzzyScan
R
efer
ence Man
ual
Getting Started
15
There are three ways to output the stored barcode data and quantity information. The preset output format is to transmit
stored data as many times as the quantity indicated.But you still can set the scanner to output stored barcode data together
with quantity information in two fields, and a preset delimter”
” will be output in between. To fulfill different application
requirements, both the delimiter and output sequency can be changed as well.
As many times as the quantity indicates <Quantity><Field Delimiter><Scanned Data>
<Scanned Data><Field Delimiter><Quantity>
How to Transmit Stored Data
The scanner is preset to transmit all the stored data by scanning the “Transmit Stored Data” command. During the
transmission, the scanner will emit continuous short clicks and the link indicator will blink blue. Then the scanner will give
two short beeps after data transmission is completed.
Transmit Stored Data
But you are still able to set the scanner to transmit the stored data by placing the scanner onto the cradle as well.
Scan Barcode Command Place Scanner onto the Cradle
Scan command or Place Scanner onto theCradle
How to Delete Scanned Data
The scanner is preset to keep all the stored data until you scan the “Clear All Stored Data” command. But you are still able to
change the setting to “Auto Delete Stored Data after Transmission” as well.
Clear All Stored Data