EXFO MaxTester 635 - Manual (Page 125)

Multimeter Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set 117
Capacitance/Opens
Capacitance/Opens Threshold Settings
The Threshold Settings page allows you to set the
Capacitive Balance Threshold parameters for the
test between 0 and 100 %.

Type is the threshold limit for each pair: either
Maximum or Minimum.

Enabled is a flag to use the current threshold:
either Yes or No.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.