EXFO MaxTester 635 - Manual (Page 271)

Setting Up DSL/IP Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set 263
Test Setup
To configure test setup values:
1. Press the up/down arrow keys to select the desired parameter.
2. Press the left/right arrow keys to view and select the options.
OR
3. Press on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4. Press to confirm the value.
5. If you make any changes to the parameter values, press the on-screen
function keys to save or cancel your input.
Channel List Setup
The Channel List Setup page in the IPTV test setup
provides a tool for you to create an alias table. It
allows you to join/leave an IPTV stream using a
symbolic name or TV channel number instead of the
IP address. Maximum entries in the table are 100,
divided into pages.

Channel Info lists 3 editable parameters:

Channel # is a numeric value from 1 to 9999.

Channel Name is a 24-character
alphanumeric entry.

IP Address is a multicast address from
224.1.1.1 to 239.255.255.254.

Previous/Next Entry buttons highlight the previous/next entry in the
table (up/down direction). When the highlight reaches the first/last
entry of the alias table page, the button(s) is disabled.