EXFO MaxTester 635 - Manual (Page 44)

Setting Up Copper Tests
36 MAX-635
Test Configuration
Test Configuration
Before performing copper tests, you can set up the software settings and
values for the cables. The MaxTester allows you to save test parameters
and threshold settings to different profiles and reuse them as needed.
The Test Configuration menu provides the utilities to
setup test parameters. The MaxTester supports several
types of copper test applications. Test parameters and
thresholds are saved into a test configuration profile. A
Profile Default is provided with a predefined set of
parameters for all test applications.
Note: Cable parameters are not included in these profiles
but can be configured in Setup.

Select Profile lists available profiles saved in the
internal memory. The current active profile is
shown in the upper information header.
An asterisk "*" on the currently Selected Profile name indicates that
modifications have been made to this profile in the Threshold
Settings or parameters of a particular test.
At power up, settings are read from the last loaded profile.

Profile Details lists the tests for configuration:

Pair Detective

FaultMapper

Auto Test

Multimeter

Noise Tests

Frequency Tests

TDR