EXFO MaxTester 635 - Manual (Page 265)

Setting Up DSL/IP Tests
Copper and VDSL2/ADSL2+ Multi-play Test Set 257
Test Configuration
4. Press to confirm the value.
5. If you make any changes to the parameter values, press the on-screen
function keys to save or cancel your input.
Select Tests
The Select Tests page allows you to Enable/Disable
the following optional sub-tests, within the 3 types of
test applications.

VoIP Test determines DSL and IP packet rates,
and calculates jitter, packet loss, and packet delay.
When enabled, all other sub-tests are
automatically disabled.

IPTV Test supports STB (set-top box) emulation
mode over DSL and Ethernet interfaces enabling
the MaxTester to join and leave multicast IPTV
streams. When enabled, all other sub-tests are
automatically disabled.

Ping is also known as ICMP echo request and determines network
connectivity and accessibility.

FTP test verifies the file transfer speed of the file download and upload.

Traceroute is a complement tool of the Ping test to determine why a
destination cannot be reached, or where the internet is broken.

Web Browser Test can only be started when a WAN connection
(either through xDSL or Ethernet) has been established.
When enabled, the sub-tests’ test pages are available in the results pages.
When highlighted, the sub-tests’ setup contents are shown on the Test
Setup tab.
Note: Select Tests and Test Setup tabs are not available in Sync Only and
Bridged Access Modes.